Lexia-3 Lexia3 V48 PP2000 V25 XS Evolution With Diagbox V7.83 Software

Lexia-3 Lexia3 V48 PP2000 V25 XS Evolution With Diagbox V7.83 Software For Citroen/Peugeot Diagnostic tool

Lexia3 V48 PP2000 Interface works with both FOR Citroen and FOR Peugeot, now support for Peugeot 307. It is compatible with most of FOR Citroen and FOR Peugeot cars from 1995. It support read identification, read fault codes, clear fault codes, auto-scan etc. Diagnostics is performed via OBD-II connector or via manufacturer-specific connector (only older cars, pre-2001).

Top 4 Reasons to Get Lexia3 V48 :
1. Update: By CD
2. Support Multi-Language: English, German, French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish, Dutch, Polish, Italian, Hungary, Greek, Czech
3.Support for Peugeot 307
4. Version: Lexia3 V48 , PP2000 V25, Diagbox V7.83

Description:
1.It is compatible with for Citroen cars including: C1, C2, C3, C4, C6, C8, C-CROSSER, NEMO, BERLINGO, JUMPY, JUMPER, AX, SAXO, BX and so on. But please pay attention, according to our customer’s experience, this item can not works good at C5 new models.
2.It is compatible with most for Peugeot cars from 1995. If you have the two types of cars, please pay attention, please check with us first before purchase.
3.Diagnostics is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).

Functions Of Lexia3 V48 :
Unlike other universal car scanner tools which only read fault codes; this software performs nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).
1.Read identification
Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc…
2. Read fault codes
Displays all stored and pending fault codes with complete description (e.g. “Rail pressure – too low pressure”).
Program supports report printing or copy to clipboard.
3. Clear fault codes
this function clears all stored fault codes and other diagnostic information.
4. Auto-scan (complete car scan/test)
Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.
5. Measured Values
Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.
6. Actuator test
Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc..)

User Manual
Diagbox V7.83 software free download links & User Guide. Please contact with our Customer service staff.

FAQ:
Q1.Is there any new car models which new lexia3 V48 software can do?
A1: Yes, the Lexia3 V48 for Citroen/for Peugeot Diagnostic PP2000 adds some new cars as follows:
   For Peugeot Bipper
   For Peugeot Boxer III
   For Peugeot Boxer III minibus
   For Citroen Nemo
   For Citroen Jumper III
   For Citroen Jumper III minibus

Q2: Does Lexia test the tire pressure?
A2: If your car has Tire pressure control unit, lexia-3 can test the tire pressure.

Q3: Does Lexia3 V48 work with for Peugeot 308?
A3: Yes, it does, but which year of your for Peugeot 308? Lexia-3 PP2000 works with for Peugeot 308 from 1996 to 2008.

Q4: I have installed it on windows 7 system, but it cannot work, what is the problem?
A4: It can only be installed on XP system; you need to change another computer with XP system.

Q5: is PPS compatible with for Peugeot 307 HDI?
A5: PPS2000 work with Peugeot 307, but it is not compatible with Hybrid Diesel for Peugeot only with the gasoline car.

Q6: Can Lexia3 V48 PP2000 (item NO. SP08-C) work with for Peugeot 407 2005, after install the NEW DPF, can I reset DPF counter? After Eolys is full, can I reset Eolys counter?
A6: PP2000 supports for Peugeot 407 2005, but the DPF and Eolys are truck or diesel car systems, we haven’t tested it.

Q7: Would you please store the software lexia3 pp2000 and diagbox6.01 in one CD?
A7: No, they are not allowed to store in one CD, they have to be stored them in two different CD, otherwise the software installation will get errors.

Q8: During the installation of Lexia-3, I got ERROR reading “Failure of the activation.
A8:we used to store the lexia3 pp2000 software and diagbox v6.01 software in the same one CD, now they are separately stored into two different CD. Please download diagbox V6.01 software at this, if it does not work either, contact us we will ship you CD.

Q9: I install diagbox software on Windows XP3, 32BIT, but it can’t communicate with thecar, besides, I install PPS software in another computer (Win XP, 32bit, SP3), I successfully active it, but can’t communicate with the car either, what’s the problem?
A9: Try to install Lexia3 software, if lexia3 software can communicate with the car. So it suggests you didn’t install diagbox software properly, or your computer system is not compatible with diagbox software, we will produce video tutorial on how to install Diagbox, please check it in the column “video”.