For Toyota G and for Toyota H Chip Vehicle OBD Remote Key Programming Device Best Quality

For Toyota G & H Chip car Key Programmer Vehicle OBD Remote key Device

For-Toyota G & H Chip Vehicle OBD Remote Key Programming Device support programming both For Toyota G & H chip vehicle via OBD2 port.

For-Toyota G & H Chip Key Programmer apply to 4D67,68,72(G), support both G & H chip, test on 2015 Camry

For-Toyota Add Remote Control
Get in the car and close the door, insert the key and turn the key on, insert the device into OBD. After the sound(Dee-), it will start to add the remote control.
After the sound ( Dee- Dee-),open the door, when hear the sound blaring. Press ‘ lock & unlock’ key at the same time. And press the’ lock’ key. If the blaring end, It’s OK.
Note: Switch is on the right (add remote control).

For-Toyota Add Transponder:
Get in the car and close the door, insert the main key into the lock and turn the key on,and then insert the device into the OBD. If it will sound twice, it will start to add transponder.
After the sound (Dee-Dee-), 2-3 minutes later, anti-theft light is on. And then remove the key( anti-theft light will flash), insert the new key and doesn’t need turn the key,
anti-theft light will be off later.
Note: switch is on the left.( add transponder)

Customer Feedback:
It works perfectly fine. I had not used it until now to do immo but remote programming works as advertised. Very simple. Tested on For Toyota Highlander and For Toyota Rav4 until now.
Separate key and remote on these cars that I tested.

Package including:
1pc x For Toyota G & H OBD Remote Key Programmer

· CAN (Controller Area Network) capability1 x manual· Easy to use with friendly interface1 x Carry Case· Turn off MILs of engine, airbag, ABS , A/T and most other systems1 x Nlony bag· Highly reliable and accurate1 x USB cable

VS450 scanner VAG VS450 CAN OBDII SCANT